Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Washington, MO

Rust Stain Removal for Stucco in Washington, MO

Soft wash for stucco. Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry. Typical cost $150-$500.

From the free quote to the final rinse, rust stain removal for stucco in Washington, MO follows a simple process: inspect, protect, clean, rinse and check. With stucco, the right approach is soft wash.

Method and pressure

Soft washCleaning method
Soft wash only, typically under 500 PSIPressure

Cleaning solution: A diluted house-wash solution with surfactant, given time to dwell, then a gentle rinse.

Caring for stucco

Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots. Hairline cracks are common, and high pressure can force water into them or break off the finish coat.

Avoid: High pressure, which can etch the texture, blow out patches and push water behind the wall.

How often: Every 1-2 years.

Is it time for rust stain removal for stucco?

  • Orange or brown streaks where sprinklers hit
  • Orange speckles from fertilizer granules
  • Rust rings under furniture or planters
  • Orange runoff below metal railings

Why it gets dirty

  • Iron in well water or irrigation water
  • Fertilizer containing iron
  • Rusting metal furniture, railings and fixtures

Safe steps for homeowners

  • Sweep fertilizer granules off concrete right after spreading
  • Adjust sprinklers to avoid walls and paths
  • Ask about an iron filter for well-water irrigation

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Using the wrong acid, which can etch concrete or discolor siding
  • Pressure washing, which doesn't remove rust and can etch the surface

What happens on the day

  1. Identify the stain source
  2. Apply a surface-safe rust remover
  3. Let it work and rinse
  4. Repeat on stubborn spots
  5. Advise on stopping the source

How much does rust stain removal for stucco cost?

$150-$500Typical range for typical sprinkler or fertilizer staining
1-3 hoursTypical time on site
As needed; stains return if the source isn't fixedRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for stucco

Rust Stain Removal for Stucco in Washington, MO

Rust from sprinklers and fertilizer, leaf tannin stains in the fall, and salt residue in the spring are the most common stains on Missouri driveways and walkways.

Crews serve all of Washington (ZIP code 63090), plus Union (7.5 mi), Villa Ridge (9 mi), Gray Summit (11.6 mi) and New Haven (11.7 mi). Call (877) 658-5887 for a free quote in Washington.

Rust Stain Removal for Stucco: frequently asked questions

How much does rust stain removal for stucco cost in Washington, MO?

Rust Stain Removal for Stucco typically costs $150-$500 for typical sprinkler or fertilizer staining, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (877) 658-5887 for a free quote.

Do you use high pressure for rust stain removal for stucco?

For stucco: soft wash only, typically under 500 PSI. What we avoid: high pressure, which can etch the texture, blow out patches and push water behind the wall. The cleaning solution does most of the work, followed by a gentle rinse.

Is rust stain removal for stucco safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule rust stain removal for stucco?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Washington, MO

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Screen Enclosure & Lanai Cleaning

Cleaning pool cages, screen rooms and lanais, including the frame, screens and the deck below.

Typical $200-$500

Stucco Cleaning

Stucco and EIFS soft washing that removes green and black growth, dirt and rust stains without damaging the finish.

Typical $300-$800

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Pressure Washing for Flagstone

Low-to-moderate pressure wash. Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals.

Typical $150-$600

House Washing for Log Homes

Low-pressure wash. Log homes need regular cleaning to keep mildew and insects from settling into checks and cracks, and the logs must be clean and dry before a new stain goes on.

Typical $300-$700

Efflorescence Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$600

Concrete Sealing

Concrete cleaning and sealing that helps resist stains, water and freeze-thaw damage on driveways, patios and stamped concrete.

Typical $400-$1,200

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Pool Deck Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $200-$500

Ready for a cleaner home or business?

Get a free pressure washing quote in Washington, MO. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote